Our blog

Bulk Transportation: Everything About Tanker, Liquid and Dry Bulk Hauling

Experienced 3PL Provider For Tanker, Liquid And Dry Bulk Hauling Should Be Assessed On These Factors Before Being Hired

Importance of Third Party Logistics Provider

All-Freight is a 3PL or third party logistics provider in the food transportation industry. The company was founded in 2005, but their experience in transportation dates back to 1978. The business specializes in dry bulk, liquid and tanker hauling. This area is highly specialized within the transportation industry. The company must be experienced and reliable to make certain that the liquid freight is properly, efficiently and safely handled. It is also important for the company to maintain a high level of quality of customer service.

For Food Safety – Why Food Grade Transportation and Milk Hauler Services Need To Be Quality Oriented?

You must observe food safety procedures throughout the duration of the shipping process to make certain the integrity of your product is maintained. This requires top of the line equipment, an excellent sanitizing process and the highest quality standards. These are the reasons a third party logistics provider is critical for bulk food grade transportation. This service will save you valuable time and expense. This is accomplished through 3PL management, which is critical for choreographing the entire route of your shipment, the transportation of bulk liquid grade foods, distribution center management and farm transportation. The best possible way to ensure your shipment arrives safely and on time is by using an experienced third party logistics provider. The number of details requiring proper care are immense. This process is much easier when a 3PL provider is in control. The three most important benefits are ensuring your business is able to grow, saving your company critical time and reducing your cost.

The Efficiency Factor

Maintaining your fleet is expensive due to the cost of hiring experienced drivers and fleet maintenance. Your largest expense is most likely hiring experienced drivers. You will not have to pay these expenses directly when you hire a 3PL company. You will only need to pay when you require drivers, so you are only responsible for paying when you need services. This is what decreases your expenses and liability. Your freight, bulk liquid food and milk hauler services must arrive on schedule. You can only accomplish this by understanding the weather, routing and potential traffic delays. A 3PL provider has experienced dispatchers and completely eliminates this concern. You will be assured your freight will be delivered on schedule, efficiently and most importantly, safely.

You must achieve stable and consistent growth for your business to be successful. Reducing your expenses and liability is an important first step. If your overhead is too high, your business growth can easily become stagnant. An experienced 3PL provider eliminates this issue. It does not matter what kind of strategy you are using, your company can flourish and grow. The FDA established Order 13563 to draw attention too the importance of harmonizing rules, lowering your costs, qualifying your benefits and promoting flexibility. Numerous regulations and rules have also been created by the FDA to ensure safety and decrease costs for proper transportation.

Properly Unloading and Loading Bulk Liquid Tanks

The right equipment and liquid tanks are critical for both loading and unloading the bulk liquid tanks. This requires good communication between the 3PL provider and the contacts at both the pickup and delivery sites. These individuals must have a full understanding of each and every requirement because they are the contacts for confirming the details regarding both the equipment and the procedures. A 3PL provider takes responsibility for unloading and loading without the need for supervision. An experienced and reliable driver is an important component for success. The driver will already know if the product will be loaded using a series of drums, a tank or other containers. This means they will already have the correct equipment for the job. The next step is inspecting the trailer to make certain it is free of odors, dry and clean.

Prior to unloading the cargo, a sample should be taken by the receiver to ensure the correct product has been delivered and the shipment is in good condition. Once the hoses have been attached by the driver, the receiver needs to make certain the product is flowing properly into the correct container or tank. The two main methods for unloading cargo are by pump or compressor. It is important to note there are differences between the two methods. If the compressor is being used for unloading, the dome must remain closed. The dome must remain open with a pump or the trailer walls will be collapsed by the vacuum used for the pump. This destroys a $100,000 piece of equipment. 3PL drivers are experienced and will not make this costly mistake. Some trailers unload from the rear and others from the center. If the truck is parked on an upward pitch with rear unloading, some liquid will be stuck towards the front. Leftover cargo is referred to as heel and this loss will cost you money. The drivers for 3PL providers make certain the environment is well suited for the type of unloading necessary to avoid waste.

Washing the Trailer for Liquid Bulk

Washing the trailer is the main difference between liquid bulk freight and other cargo. The process is inconvenient yet vital because it prevents contamination and products from coming in contact with each other. When a 3PL driver picks up the load, they will inspect the tank and request a washout slip. This is available at the wash station. This document shows the specifics of how the equipment was washed. This shows if the process was performed correctly or incorrectly. Not all washing facilities are capable of cleaning all liquid bulk tanks. Some handle food grade loads and others only chemical loads. Depending on the load, the wash station may use a caustic wash, steam or detergent. The hoses and pumps are washed at the same time. The washing expense is a separate charge on the freight bill. The washing charge for specific types of carriers and freight is standard. Some wash stations charge actual dollar amounts depending on the specifics of the wash. This process is extremely important because it helps preserve the integrity of the next shipment.

The Importance of History – Freighting Since 1978

All-Freight has roots going back to 1978. The company has been specializing in food grade transportation for 27 years. The company started out with milk hauler services for the local farms. In 1955, All-Freight expanded their distribution network to include a wider variety of clients in 38 states. By 1995, the company was on the board of directors for two dairy plants. They have gained substantial experience, have become veterans of freight transportation, have insight into the industry and their knowledge is applicable for the needs of the manufacturer and the carrier.

 

Photo Credit: Bruno van der Kraan on Unsplash


March 8, 2019 0 comments blog

Leave a Comment

Back to top